Paper White video

A while back I posted an article called How White is Paper White

As a follow-up to my last post on the basic properties of printing paper media I thought I’d post this video to refresh the idea of “white”.

In this video we basically look at a range of 10 Permajet papers and simply compare their tints and brightness – it’s an illustration I give at my print workshops which never fails to amaze all the attendees.

I know I keep ‘banging on’ about this but you must understand:

Very few paper whites are even close to being neutral.
No paper is WHITE in terms of luminosity – RGB 255 in 8 bit colour terms.
No paper can hold a true black – RGB 0 in 8 bit colour terms.

In real-world terms ALL printing paper is a TINTED GREY – some cool, some warm.

If we attempted to print the image above on a cool tinted paper then we would REDUCE or even CANCEL OUT the warm tonal effects and general ‘atmosphere’ of the image.

Conversely, print it to a warmer tinted ‘paper white’ and the atmosphere would be enhanced.

Would this enhancement be a good thing? Well, er NO – not if we were happy with our original ‘on screen’ processing.

You need to look upon ‘paper white’ as another TOOL to help you achieve your goal of great looking photographs, with a minimum of fuss and effort on your part.

We have to ‘soft proof’ our images if we want to get a print off the printer that matches what we see on our monitor.

But we can’t soft proof until we have made a decision about what paper we are going to soft-proof to.

Choosing a paper who’s characteristics match our finished ‘on screen’ image in terms of TINT especially, will make the job of soft proofing much easier.

How, why?

Proper soft proofing requires us to make a copy of our original image (there’s most peoples first mistake – not making a copy) and then making adjustments to said copy, in a soft proof environment, so that it it renders correctly on the print – in other words it matches our original processed image.

Printing from Photoshop requires a hard copy, printing from Lightroom is different – it relies on VIRTUAL copies.

Either way, this copy and its proof adjustments are what get sent to the printer along what we call the PRINT PIPELINE.

The print pipeline has to do a lot of work:

It has to transpose our adjusted/soft proofed image colour values from additive RGB to print CMYK
It has to up sample or interpolate the image dpi instructions to the print head, depending on print output size.
It has to apply the correct droplet size instructions to each nozzle in the print head hundreds of times per second.
And it has to do a lot of other ‘stuff’ besides!!

The key component is the Printer Driver – and printer drivers are basically CRAP at carrying out all but the simplest of instructions.

In other words they don’t like hard work.

Printing to a paper white that matches our image:

Warm image to warm tint paper white

Cool image to cool paper white

will reduce to the amount of adjustments we have to make under soft proofing and therefore REDUCE the printer driver workload.

The less work the print driver has to do, the lower is the risk of things ‘getting lost in translation‘ and if nothing gets lost then the print matches the on screen image – assuming of course that your eyes haven’t let you down at the soft proofing stage!

IMPORTANT – Click Image to Enlarge in new window

If we try to print this squirrel on the left to Permajet Gloss 271 (warmish image to very cool tint paper white) we can see what will happen.

We have got to make a couple of tweaks in terms on luminosity BUT we’ve also got to make a global change to the overall colour temperature of the image – this will most likely present us with a need for further opposing colour channel adjustments between light and dark tones.

IMPORTANT – Click Image to Enlarge in new window

Whereas the same image sent to Permajet Fibre Base Gloss Warmtone all we’ll have to do is tweak the luminosity up a tiny bit and saturation down a couple of points and basically we’ll be sorted.

So less work, and less work means less room for error in our hardware drivers; this leads to more efficient printing and reduced print production costs.

And reduced cost leads to a happy photographer!

Printing images is EASY – as long as you get all your ducks in a row – and you’ve only got a handful of ducks to control.

Understanding print media and grasping the implications of paper white is one of those ducks………

Become a patron from as little as $1 per month, and help me produce more free content.

Patrons gain access to a variety of FREE rewards, discounts and bonuses.

What is Paper White?

We should all know by now that, in RGB terms, BLACK is 0,0,0 and that WHITE is 255,255,255 when expressed in 8 bit colour values.

White can also be 32,768: 32,768: 32,768 when viewed in Photoshop as part of a 16 bit image (though those values are actually 15 bit – yet another story!).

Either way, WHITE is WHITE; or is it?

Arctic Fox in Deep Snow ©Andy Astbury/Wildlife in Pixels

Take this Arctic Fox image – is anything actually white? No, far from it! The brightest area of snow is around 238,238,238 which is neutral, but it’s not white but a very light grey. And we won’t even discuss the “whiteness” of the fox itself.

Hen Pheasant in Snow ©Andy Astbury/Wildlife in Pixels

The Hen Pheasant above was shot very late on a winters afternoon when the sun was at a very low angle directly behind me – the colour temperature has gone through the roof and everything has taken on a very warm glow which adds to the atmosphere of the image.

Extremes of colour temperature – Snow Drift at Sunset ©Andy Astbury/Wildlife in Pixels

We can take the ‘snow at sunset’ idea even further, where the suns rays strike the snow it lights up pink, but the shadows go a deep rich aquamarine blue – what we might call a ‘crossed curves’ scenario, where shadow and lower mid tones are at a low Kelvin temperature, and upper mid tones and highlights are at a much higher Kelvin.

All three of these images might look a little bit ‘too much’ – but try clicking one and viewing it on a darker background without the distractions of the rest of the page – GO ON, TRY IT.

Showing you these three images has a couple of purposes:

Firstly, to show you that “TRUE WHITE” is something you will rarely, if ever, photograph.

Secondly, viewing the same image in a different environment changes the eyes perception of the image.

The secondary purpose is the most important – and it’s all to do with perception; and to put it bluntly, the pack of lies that your eyes and brain lead you to believe is the truth.

Only Mother Nature, wildlife and cameras tell the truth!

So Where’s All This Going Andy, and What’s it got to do with Paper White?

Fair question, but bare with me!

If we go to the camera shop and peruse a selection of printer papers or unprinted paper samplers, our eyes tell us that we are looking at blank sheets of white paper; but ARE WE?

Each individual sheet of paper appears to be white, but we see very subtle differences which we put down to paper finish.

But if we put a selection of, say Permajet papers together and compare them with ‘true RGB white’ we see the truth of the matter:

Paper whites of a few Permajet papers in comparison to RGB white – all colour values are 8bit.

Holy Mary Mother of God!!!!!!!!!!!!!!!!

I’ll bet that’s come as a bit of a shocker………

No paper is WHITE; some papers are “warm”; and some are “cool”.

So, if we have a “warmish” toned image it’s going to be a lot easier to “soft proof” that image to a “warm paper” than a cool one – with the result of greater colour reproduction accuracy.

If we were to try and print a “cool” image on to “warm paper” then we’ve got to shift the whole colour balance of the image, in other words warm it up in order for the final print to be perceived as neutral – don’t forget, that sheet of paper looked neutral to you when you stuck it in the printer!

Well, that’s simple enough you might think, but you’d be very, very wrong…

We see colour on a print because the inks allow use to see the paper white through them, but only up to a point. As colours and tones become darker on our print we see less “paper white” and more reflected colour from the ink surface.

If we shift the colour balance of the entire image – in this case warm it up – we shift the highlight areas so they match the paper white; but we also shift the shadows and darker tones. These darker areas hide paper white so the colour shift in those areas is most definitely NOT desirable because we want them to be as perceptually neutral as the highlights.

What we need to do in truth is to somehow warm up the higher tonal values while at the same time keep the lowest tonal values the same, and then somehow match all the tones in between the shadows and highlights to the paper.

This is part of the process called SOFT PROOFING – but the job would be a lot easier if we chose to print on a paper whose “paper white” matched the overall image a little more closely.

The Other Kick in the Teeth

Not only are we battling the hue of paper white, or tint if you like, but we also have to take into account the luminance values of the paper – in other words just how “bright” it is.

Those RGB values of paper whites across a spread of Permajet papers – here they are again to save you scrolling back:

Paper whites of a few Permajet papers in comparrison to RGB white – all colour values are 8bit.

not only tell us that there is a tint to the paper due to the three colour channel values being unequal, but they also tell us the brightest value we can “print” – in other words not lay any ink down!

Take Oyster for example; a cracking all-round general printer paper that has a very large colour gamut and is excellent value for money – Permajet deserve a medal for this paper in my opinion because it’s economical and epic!

Its paper white is on average 240 Red, 245 Green ,244 Blue. If we have any detail in areas of our image that are above 240, 240, 240 then part of that detail will be lost in the print because the red channel minimum density (d-min) tops out at 240; so anything that is 241 red or higher will just not be printed and will show as 240 Red in the paper white.

Again, this is a problem mitigated in the soft proofing process.

But it’s also one of the reasons why the majority of photographers are disappointed with their prints – they look good on screen because they are being displayed with a tonal range of 0 to 255, but printed they just look dull, flat and generally awful.

Just another reason for adopting a Colour Managed Work Flow!

Become a patron from as little as $1 per month, and help me produce more free content.

Patrons gain access to a variety of FREE rewards, discounts and bonuses.