The Importance of Finished Image Previsualization

The Importance of Finished Image Previsualization (Patreon Only).

For those of you who haven’t yet subscribed to my YouTube channel, I uploaded a video describing how I shot and processed the Lone Tree at Llyn Padarn in North Wales the other day.

You can view the video here:

Image previsualization is hugely important in all photography, but especially so in landscape photography.

Most of us do it in some way or other.  Looking at images of a location by other photographers is the commonest form of image previsualization that I come across amongst most hobby photographers – and up to a point, there’s nothing intrinsically wrong in that – as long as you put your own ‘slant’ on the shot.

But relying on this method alone has one massive Achilles Heel – nature does not always ‘play nice’ with the light!

You set off for your chosen location with a certain knowledge that the weather forecast is correct, and you are guaranteed to get the perfect light for the shot you have in mind.

Three hours later, you arrive at your destination, and the first thought that enters your head is “how do I blow up the Met Office” – how could they have lied to me so badly?

If you rely solely on ‘other folks images’ for what your shot should look like, then you now have a severe problem.  Nature is railing against your preconceptions, and unless you make some mental modifications then you are deep into a punch-up with nature that you will never win.

Just such an occasion transpired for me the other day at Llyn Padarn in North Wales.

The forecast was for low level cloud with no wind, just perfect for a moody shot of the famous Lone Tree on the south shore of the lake.

So, arriving at the location to be greeted by this was a surprise to say the least:

image previsualization

This would have been disastrous for some, simply because the light does not comply with their initial expectations.  I’ve seen many people get a ‘fit of the sulks’ when this happens, and they abandon the location without even getting out of the car.

Alternatively, there are folk who will get their gear set up and make an attempt, but their initial disappointment becomes a festering ‘mental block’, and they cannot see a way to turn this bad situation into something good.

But, here’s the thing – there is no such thing as a bad situation!

There are however, multiple BAD REACTIONS to a situation.

And every adverse reaction has its roots buried in either:

  • Rigid, inflexible preconceptions.
  • Poor understanding of photographic equipment and post-processing.

Or both!

On this occasion, I was expecting a rather heavy, flat-ish light scenario; but was greeted by the exact opposite.

But instead of getting ‘stroppy about it’, experience and knowledge allow me to change my expectation, and come up with a new ‘finished image previsualization’ on the fly so to speak.

image previsualization

Instead of the futility of trying to produce my original idea – which would never work out – I simply change my image previsualization, based on what’s in front of me.

It’s then up to me to identify what I need to do in order to bring this new idea to fruition.

The capture workflow for both ‘anticipated’ and ‘reality’ would involve bracketing due to excessive subject brightness range, but there the similarity ends.

The ‘anticipated’ capture workflow would only require perhaps 3 or 4 shots – one for the highlights, and the rest for the mid tones and shadow detail.

But the ‘reality’ capture workflow is very different.  The scene has massive contrast and the image looks like crap BECAUSE of that excessive contrast. Exposing for the brightest highlights gives us a very dark image:

image previsualization

But I know that the contrast can be reduced in post to give me this:

image previsualization

So, while I’m shooting I can previz in my head what the image I’ve shot will look like in post.

This then allows me to capture the basic bracket of shots to capture all my shadow and mid tone detail.

If you watch the video, you’ll see that I only use TWO shots from the bracket sequence to produce the basic exposure blend – and they are basically 5 stops apart. The other shots I use are just for patching blown highlights.

Because the clouds are moving, the sun is in and out like a yo-yo.  Obviously, when it’s fully uncovered, it will flare across the lens.  But when it is partially to fully covered, I’m doing shot after shot to try and get the best exposures of the reflected highlights in the water.

By shooting through a polarizer AND a 6 stop ND, I’m getting relatively smooth water in all these shots – with the added bonus of blurring out the damn canoeists!

And it’s the ‘washed out colour, low contrast previsualization’ of the finished image that is driving me to take all the shots – I’m gathering enough pixel data to enable me to create the finished image without too much effort in Lightroom or Photoshop.

Anyway, go and watch the video as it will give you a much better idea of what I’m talking about!

But remember, always take your time and try reappraise what’s in front of you when the lighting conditions differ from what you were expecting.  You will often be amazed at the awesome images you can ‘pull’ from what ostensibly appears to be a right-off situation.

 

Become a patron from as little as $1 per month, and help me produce more free content.

Patrons gain access to a variety of FREE rewards, discounts and bonuses.

Add your comments and feedback

This site uses Akismet to reduce spam. Learn how your comment data is processed.